800.237.4567
Ideally, every electrical panel should
be surge protected. However, this
may not be practical or feasible.
Proven surge protection practices
do not have to be complicated or
costly. All you need to do is
address the following:
1- Where should hard wired
SPDs be installed on the
electrical system?
2- What size and type SPD
should be used?
Surge Protecting a Hospital
Service Entrance
Applying surge protection at the incoming electrical service “Stops Surges Before They Get In.” These types of surges contain the largest surge energy warranting 300 kA or more of surge current redundancy.
Products
External SPD

TEXAS30E1
Increased Redundancy
TEXAS45E1

External - 10 Mode

TEXAL30E1
Increased Redundancy
TEXAL45E1
Outside Loads
SPDs should be installed at remote workshops or guest houses, or at panels that supply external loads to prevent back feeding surges entering the main building.
 
External SPD

TEXAS20E1
Increased Redundancy
TEXAS30E1

External - 10 Mode

TEXAL30E1
Increased Redundancy
TEXAL30E1
Lower Voltage Panels
If the facility is supplied with a higher system voltage (i.e. a 277/480V service), 120V panels need SPDs to condition residual surges leaving the service entrance SPD as well as any internally generated surges. Examples could be panels powering labs, operating rooms, or any other panels powering sensitive electronic-rich locations.
 
External SPD

TEXCS104X
Increased Redundancy
TEXDS154X

External - 10 Mode

TEXAL15E1
Increased Redundancy
TEXAL30E1
Individual Equipment
Even if surge protection is applied at the previous locations, redundant protection maybe warranted for sensitive, costly equipment. This may include CAT or MRI scanners, X-ray equipment, lab equipment, and other similar types of equipment.
 
External SPD

S50A
Increased Redundancy
TEXCS104X

Data Lines
Security, fire alarm, and telephone systems using copper communications lines need protection especially for communication circuits running between buildings within the hospital campus.
 
External SPD


S50A



APT DIN RAIL
Graphics Courtesy of Siemens Industry, Inc
Home | Products | About | Training | Library | Services | Contact | Links | Site Map
©2008-2018 All rights reserved. Advanced Protection Technologies Inc. (APT) -- ISO 9001:2008 Certified Last Modified: 11/22/2011